| 541DTVL731 Timken Tapered Roller Bearings | Limiting speed:300 r/min; d:950 mm; D1:955 mm; Basic dynamic load rating C:3450 kN; H:103 mm; Minimum axial load factor A:50; Mass bearing:185 kg; da min.:1080 mm; Da max.:990 mm; Basic static load rating C0:25000 kN; ra max.:4 mm; B:29 mm; D:1120 mm; Reference speed:160 r/min; d1:1115 mm; r1,2 min.:5 mm; Fatigue load limit Pu:1400 kN; |
| 30TPS108 Timken Tapered Roller Bearings | H:144.463 mm; s:32.941 mm; S:0.794 mm; Basic dynamic load rating C:193 kN; A:88.9 mm; da:63.5 mm; Limiting speed:3800 r/min; Mass bearing unit:8.62 kg; Attachment bolt diameter G:15.875 mm; B:65.484 mm; H1:69.85 mm; L:266.7 mm; J min.:209.55 mm; J max.:225.425 mm; H2:41.275 mm; J1:47.625 mm; |
| 23128EJ Timken Tapered Roller Bearings | Basic Dynamic Radial Load Rating C:71500 N; Sealed Speed Rating n3:3800 rpm; D:120.0000 mm; Basic Static Radial Load Rating Co:45000 N; B:49.21 mm; d:55.000 mm; Fillet Radius ra:2.00 mm; Accessories:Metal Shields; Oil Speed Rating Open/Shielded n2:6700 rpm; Grease Speed Rating Open/Shielded n1:5600 rpm; |
| 22230EJ Timken Tapered Roller Bearings | Basic Static Radial Load Rating Co:43000 N; Grease Speed Rating n1:6300 rpm; Fillet Radius ra:1.00 mm; D:72.0000 mm; Accessories:One Shield; Oil Speed Rating n2:8500 rpm; d:30.000 mm; Basic Dynamic Radial Load Rating C:46800 N; Sealed Speed Rating n3:6300 rpm; B:33.30 mm; |
| T102T102R Timken Tapered Roller Bearings | B:47.60 mm; Basic Dynamic Radial Load Rating C:95200 N; Sealed Speed Rating n3:4000 rpm; Oil Speed Rating n2:5300 rpm; Basic Static Radial Load Rating Co:95000 N; Accessories:Shield & Seal; Fillet Radius ra:2.00 mm; D:110.0000 mm; d:50.000 mm; Grease Speed Rating n1:4000 rpm; |
| 24024EJ Timken Tapered Roller Bearings | Basic Dynamic Radial Load Rating C:216000 N; Grease Speed Rating Open/Shielded n1:2200 rpm; Fillet Radius ra:2.50 mm; d:110.000 mm; Basic Static Radial Load Rating Co:250000 N; B:50.00 mm; Oil Speed Rating Open/Shielded n2:2700 rpm; Accessories:Snap-Ring; D:240.0000 mm; |
| 22217EJ Timken Tapered Roller Bearings | α:7 °; Mass rod end:2.2 kg; B:28 mm; l3 min.:65 mm; l5 ≈:25 mm; d4 ≈:58 mm; Material constant KM:330; r1 min.:0.6 mm; Specific dynamic load factor K:100 N/mm²; C1 max.:24 mm; Basic dynamic load rating C:100 kN; G:M 42x3; Basic static load rating C0:166 kN; w:50 mm; l7 min.:50 mm; dk:53 mm; d:40 mm; d2 max.:94 mm; h1:145 mm; l4 max.:194 mm; |
| 22226EJ Timken Tapered Roller Bearings | C1:8.6 mm; Reference grease quantity Gref:4.8 cm³; Calculation factor f1:0.99; db min.:82 mm; r3,4 min.:0.3 mm; Attainable speed for grease lubrication:14500 r/min; ra max.:1 mm; d:80 mm; Preload class C GC:1170 N; Calculation factor f2C:1.07; B:16 mm; r1,2 min.:1 mm; Calculation factor (back-to-back, face-to-face) X2:0.67; Calculation factor (single, tandem) Y2:0.87; Fatigue load limit Pu:0.71 kN; |
| 22318EM Timken Tapered Roller Bearings | Calculation factor e:0.86; d1 ≈:231.1 mm; Da max.:264 mm; b:22 mm; Calculation factor kr:0.095; Calculation factor Y0:0.63; Calculation factor Y1:0.73; ra max.:2.1 mm; r1,2 min.:2.1 mm; Reference speed:2200 r/min; D1 ≈:266 mm; K:7.5 mm; Mass bearing:16.4 kg; Fatigue load limit Pu:6.3 kN; D:289.5 mm; Calculation factor X:0.62; B:76 mm; d:200 mm; da min.:205 mm; Basic dynamic load rating C:178 kN; |
| 100TPS144 Timken Tapered Roller Bearings | A2:165.1 mm; Appropriate attachment bolt size G:0.75 in; R2:31.75 mm; Housing:SAF 522; Mass pillow block:33.1 kg; Ca:62.789 mm; P150°:50.7 kN; Labyrinth ring:2 x LOR 109; Da:200 mm; P60°:149 kN; J max.:368.3 mm; H2:50.8 mm; Cap bolt:2 x 3/4-10 UNC; J min.:320.675 mm; PG:1/4 NPT; ba:42.069 mm; R1:67.866 mm; H1:125.425 mm; Pa:12.5 kN; PosiTrac Plus contact element:2 x B10724-109; |
| T105 Timken Tapered Roller Bearings | Accessories:Shield & Seal; B:23.80 mm; D:62.0000 mm; Basic Dynamic Radial Load Rating C:30200 N; Grease Speed Rating n1:7000 rpm; Oil Speed Rating n2:9500 rpm; Sealed Speed Rating n3:7000 rpm; Fillet Radius ra:1.00 mm; d:30.000 mm; Basic Static Radial Load Rating Co:28000 N; |
| 22216EM Timken Tapered Roller Bearings | Initial grease fill:2749.95 g; J1:133.35 mm; A1:222.25 mm; H2:95.25 mm; PG:1/4 NPT; End plug (suffix Y):EPR 23; R1:130.175 mm; P150°:236 kN; Cap bolt, SAE grade:8; h:79.375 mm; H:473.075 mm; P120°:260 kN; Labyrinth ring:2 x LOR 168; Pa:71.2 kN; Cap bolt:1 1/2-6 UNC; Da:399.999 mm; ba:90.487 mm; P60°:691 kN; Bearing limiting speed:2000 r/min; Cap bolt recommended tightening torque:4284.4 N·m; |